Introduction to Coin-Acceptor Module for Vending-Machine
This Coin-Acceptor Module for Vending-Machine is a complete plug-and-play solution for accepting and detecting coins from users. It can accept coins from users. Detect if they are valid coins and accept them or reject them by sending them back out. It uses intelligent sensors to detect only valid coins and reject fake coins. Works on 12V and valid coins are signaled using digital pulses. Connect your microcontroller to the output of this module and start detecting every time a valid coin is inserted. You can program up to 6 different coin profiles and the module will report each coin through a different pulse output.
The sensors in this coin acceptor use the thickness, diameter, and fall time of the coins to identify them and it’s fully programmable so it is not limited to any particular type of currency. Simply use the buttons and 7-segment display on the side of the unit to select a coin profile, insert a bunch of coin samples (or the same one, over and over) and you’re good to go. . This coin acceptor also has a coin inhibitor, so your controller can tell the coin acceptor not to take any more coins. All you need is to get the coin acceptor working.
Specifications of Coin-Acceptor Module :
- Identify accuracy rate: 95%
- Diameter: 15mm-29mm
- Thickness: 1.8mm-3.0mm
- Applicable to most standard coins
- Operating voltage: DC12V ± 10%
- Working current: 50mA
- Â maximum current: 350mA (less than 0.5S)
- Humidity: ≤95%
- Storing temperature: -20℃–+85℃
- Operating temperature: -15℃–+60℃
- Recognition speed: ≤0.6sec
- Recognition: 99.5%
- Canning material: PC plastic
Applications:
- Vending Machines
- Massage Chairs
- Access Control
- Arcade Games
- Water vending machine, snack vending machine or gaming machine.
Reviews
There are no reviews yet.