Sale!

DHT11 SENSOR MODULE

175.00

The module can detect the surrounding environment of the humidity and temperature
High reliability and excellent long-term stability
The output from the digital output
Humidity measuring range: 20%~90%RH(0~50 degree (temperature compensation).
Temperature measuring range: 0~+50degree.
Humidity measurement accuracy: ?5.0%RH.
Temperature measurement accuracy: ?2.0degree.

Availability: 100 in stock

This DHT11 Digital Relative Humidity & Temperature Sensor Module is pre-calibrated with resistive sense technology coupled with NTC thermistor, for the precise reading of the relative Humidity and surrounding temperature DHT 11 break-out board is a very popular, low-cost sensor from Aosong, the breakout provides easy installation of the DHT11 sensor module.

The board is also equipped with high- performance 8-Bit microcontroller which is connected to the DHT11 sensor module. The output of the DHT11 is in the form of a digital signal on a single data pin. The sensing update frequency is to be measured at every 2sec (0.5Hz).

The complete arrangement makes the device an ideal sensing setup to be hooked up directly to any kind of microcontroller boards like Arduino?s. The board is extra featured with onboard LED, a bypass capacitor between Vcc and Gnd and a pull-up resistor across the data line and Vcc.

The DHT-11 Digital Temperature And Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed).

Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so in your code please use sensor reading interval at 2 seconds or more. Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity.

This DHT11 Digital Relative Humidity & Temperature Sensor Module is pre-calibrated with resistive sense technology coupled with NTC thermistor, for the precise reading of the relative Humidity and surrounding temperature DHT 11 break-out board is a very popular, low-cost sensor from Aosong, the breakout provides easy installation of the DHT11 sensor module.

The board is also equipped with high- performance 8-Bit microcontroller which is connected to the DHT11 sensor module. The output of the DHT11 is in the form of a digital signal on a single data pin. The sensing update frequency is to be measured at every 2sec (0.5Hz).

The complete arrangement makes the device an ideal sensing setup to be hooked up directly to any kind of microcontroller boards like Arduino?s. The board is extra featured with onboard LED, a bypass capacitor between Vcc and Gnd and a pull-up resistor across the data line and Vcc.

The DHT-11 Digital Temperature And Humidity Sensor is a basic, ultra low-cost digital temperature and humidity sensor. It uses a capacitive humidity sensor and a thermistor to measure the surrounding air and spits out a digital signal on the data pin (no analog input pins needed).

Its fairly simple to use, but requires careful timing to grab data. The only real downside of this sensor is you can only get new data from it once every 2 seconds, so in your code please use sensor reading interval at 2 seconds or more. Compared to the DHT22, this sensor is less precise, less accurate and works in a smaller range of temperature/humidity.

DHT11 is a Humidity and Temperature Sensor, which generates calibrated digital output. DHT11 can be interface with any microcontroller like Arduino, Raspberry Pi, etc. and get instantaneous results. DHT11 is a low cost humidity and temperature sensor which provides high reliability and long term stability.

It uses a capacitive humidity sensor and a thermistor to measure the surrounding air, and outputs a digital signal on the data pin (no analog input pins needed). Its very simple to use, and libraries and sample codes are available for Arduino and Raspberry Pi.

This module makes is easy to connect the DHT11 sensor to an Arduino or microcontroller as includes the pull up resistor required to use the sensor. Only three connections are required to be made to use the sensor – Vcc, Gnd and Output.

It has high reliability and excellent long-term stability, thanks to the exclusive digital signal acquisition technique and temperature & humidity sensing technology.

Specifications:-

  • Power Supply: 3.3~5.5V DC
  • Output: 4 pin single row
  • Measurement Range: Humidity 20-90%RH, Temperature 0~50℃
  • Accuracy: Humidity +-5%RH, Temperature +-2℃
  • Resolution: Humidity 1%RH, Temperature 1℃
  • Interchangeability: Fully Interchangeable
  • Long-Term Stability: <±1%RH/year

Pin Description:-

  • Pin 1:     Power +Ve (3.3VDC to 5.5VDC Max wrt. GND)
  • Pin 2:     Serial Data Output
  • Pin 3:     Power Ground or Power –Ve

Note : Find the best solution for electronics components and technical projects  ideas

keep in touch with our social media links as mentioned below

Mifratech websites : https://www.mifratech.com/public/

Mifratech facebook : https://www.facebook.com/mifratech.lab

mifratech instagram : https://www.instagram.com/mifratech/

mifratech twitter account : https://twitter.com/mifratech

Contact for more information : [email protected] / 080-73744810 / 9972364704

 

 #bestelectroniccomponentsnearme #bestcomponentsshoparoundme #topeelectroniccomponentsshop #lcdinterfacingwithaurduinouno #lcdinterfacingwithnano #lcdinterfacingwithnodemcu #lcdinterfacingwithraspbeerpi #lcdinterfaingwithnodemcuinbreadeboard #microsdcardmodule #allengineeringstudentsprojectscomponentsavailable #wholesalepricecomponents #allelectroniccomponentsavailable #bestpricecomponentsstore #allroboticcomponentsavailable #allelectronicscomponentsavailablelike #ARDUINO UNO #RASPBERRYPI #ESP32 #ESP8266 #RFIDMODULERC522 #4X4KEYPAD #microsdcardmodule #cp2102 #arduinopromini #nodemcu #drivercircuit #vibrationsensor #rainsensor #bmp180 #bmp280interfacingwitharduino #ADXL335ACCELEROMETER #soundsensor #5voltsadapter #12voltsadapters #wifismartcamera #moistersensor #watersensor #eyeblinksensor #ultrasonicsensorhcsr04 #currentsensor #voltagesensor #ecgsensormoduleAD8232 #PIRsensor #IRsensor #irproximitysensor #DS18B20tempraturesensor #dht22tempraturesensor #dht11temperaturesensorandhumiditysensor #flamesensor #touchsensor #fluxsensor #allsensorsavailablesofthisstore #9voltsbattery #9voltsbatteryclip #lithineumbatterycell #3.7lithiniumbattery #duresellbattery #16x2LCDdisplay #20x4LCDdisplay #I2Cmodule #LCDkeypadshield #DC-DCconverter #ultrasonicholder #0.98OLEDdisplay #rotaryencoder #12voltsbuzzer #5voltsbuzzer #gassensor #metaldetectorsensor #1channelrelaymodule #2channelrelaymodule #4channelrelaymodule #8channelrelaymodule #16channelrelaymodule #allvaluesofresistor #allvaluesofcapacitors #allvaluesofmosfet #allvaluesofIC`s #3mmleds #flowratesensor #pumpsensormodule #allvaluesofdcmotors #bomotors #bowheels #roboticmotors #roboticwheels #roboticchassis #roboticclamps #roboticscrow #allkindofroboparts #jumperwires #generalpurposewire #solderingirin #solderinglead #solderingflux #multimeter #glowgun #glowstick #cutter #tipesofpushbutton #slidebutton #onofbutton #tongleswitches #alltypesofswitches #alltypesofarduinocables #alltypesofcables #allsizeofsolarpanels #scrowdriverset #complatelyelectroniccomponentsstore  #partsstorenearmeopen

#rvpartsstorenearmeopentoday #appliancepartsstorenearmeopennow
#electronicpartsstorenearmeopennow
#appliancepartsstorenearmeopentoday
#are there any auto parts stores open
where to buy cheap pc components
where can i buy cheap pc parts
where can i buy mini robotic components
where to buy cheapest pc components

 

electrical and electronics components shop near me electrical components buy online Best price electronic components store, all engineering students projects components by mifraelectronics , all robotic parts available all project components available like Arduino Uno ,Arduino NANO, raspberry pi, ESP32, ESP8266 , ESP32 WITH CAM, all values of resister all values of capacitor all values of sensors like flame MQ 7 GAS SENSER sensor, ultrasonic sensor, voltage sensor , current sensor, ECG sensor module (AD8232), ir sensor, touch sensor, DHT11, DHT22, FLUX SENSOR, AND LCD’S RELAY’S AND ALL VALUES OF IC’S all kinds of electronic components available by mifraelectronics best for online and offline services and best for price.

parts store near me open
car parts shop near me open now
auto parts shop near me open
rv parts store near me open today
appliance parts store near me open now
electronic parts store near me open now
appliance parts store near me open today
are there any auto parts stores open
where to buy cheap pc components
where can i buy cheap pc parts
where can i buy mini robotic components
where to buy cheapest pc components

Weight 0.15 kg

Reviews

There are no reviews yet.

Be the first to review “DHT11 SENSOR MODULE”

Your email address will not be published.